M220 Mobile Reader
The M220 is a battery-powered, portable reader which processes active RFID tag data and links directly to a wide variety of Bluetooth-enabled computing devices. The capabilities of the rugged, lightweight reader further enhance a customer’s ability to monitor mobile assets or personnel. It is equally valuable for the performance of on-demand audits and field inventories. It can be worn on a belt clip, mounted in a vehicle, stowed in a pocket or used in a variety of ad-hoc applications.
The M220 Mobile Reader interprets and reports the radio frequency messages emitted by RF Code’s active RFID tags at distances of up to 70 meters and reports signal strength information for each tag processed. Tag transmissions are processed in real time which enables asset managers to quickly locate and identify tagged assets. With software applications from RF Code’s integration partners, almost any Bluetooth-enabled wireless device can be put into service as an asset tracking terminal (when paired with an M220 Mobile Reader). Windows Mobile handhelds, notebook PCs, ultramobile computers and BlackBerry smartphones can be empowered for asset tracking and management purposes. RF Code’s patented communication protocols allow for very high tag densities. Large populations of tags can be monitored and inventoried using a single reader. In standalone Tag Collection Mode, the M220 can record and save more than 4000 unique tag IDs. When used in conjunction with RF Code’s sensor tags, the M220 can deliver real-time location, context and condition-aware data to managers in today’s most demanding environments.
The reader’s maximum sensitivity (maximum range) depends upon the operating environment. The operating read range is software configurable and can be adjusted for near and long-range searches. Continuous operating time is typically 8-10 hours on a fully-charged battery.
Mobile Form Factor with Bluetooth® Wireless Data Interface
Wearable, Lightweight Design with Full M-Series Reader Functionality
Enables Remote Inventory and On-Demand Search Applications
High Throughput Performance Supports Large Tag Populations
Patented Anti-Collision Technology to Manage High RF Densities
Software Configurable Range Control Settings
On-board Rechargeable Battery
Long and Short-Range Antenna Configurations
Direct API Interface Available
Operation |
|
| Operating Frequency |
433.92 MHz |
| Communication Interface | Bluetooth® 1.1 serial and wired USB 2.0 |
| Receiver Sensitivity | > 50 dB dynamic range (-58 dB to -108 dB) |
| Default Range Settings | 8 factory programmable range settings in 5 dB increments |
| Customizable Control | Threshhold settings selectable in 1 dB increments |
| Tag Density | Greater than 100 tag reports per second |
| Group Code Management | Up to 8 tag group codes can be monitored simultaneously |
Physical Characteristics |
|
| Width | 4.37 in (111 mm) 4.79 in (with belt clip) |
| Depth | 0.99 in (25.1 mm) 1.15 in (with belt clip) |
| Height | 3.01 in (76.5 mm) 3.01 in (with belt clip) |
| Weight | 5.2 oz (147 g) 5.7 oz (with belt clip) |
| Form Factor |
Injection-molded chassis of high-impact ABS plastic |
| LED Indicators |
Link, Activity, Power, Charging |
| Audio Indicators | Audible low battery indicator and messaging |
| Power Switch | Push button on/off switch |
Environmental |
|
| Operating Temperature: |
-20° C to +45° C |
| Storage Temperature: |
-20° C to +60° C |
| Operating Humidity | 10% to 90% non-condensing |
Power |
|
| Battery | Rechargeable lithium polymer battery pack |
| Battery Life | 3-5 years* |
| Charger | USB power interface |
Antennas |
|
| Long Range | (2) ¼ wave articulated helical antennas |
| Short Range |
(2) stub antennas |
Wireless Link |
|
| Bluetooth Qualification | Bluetooth QD ID B012541 |
*Do not leave the battery in a discharged state: always recharge it after use. Otherwise, it could lead to loss of performance or in more severe cases make the battery useless.


