The 433 MHz R200 Rack Reader reader interprets and reports the radio frequency messages emitted by RF Code R100, R110, and R120 tags attached to assets located within the rack. Its unique antenna design and configuration enables the R200 to quickly locate and identify tagged assets in the rack. Once assets are located, the R200 works with RF Code’s Zone Manager application (sold separately) to precisely determine the rack in which the asset resides. R200 readers feature a rear-facing Ethernet connection for convenient connection to an organization’s data network.. RF Code’s patented communication protocols allow for very high tag densities.

The compact R200 reader is designed to use little or no space in your rack cabinets. It can be installed in a standard 1-U space in the top of the cabinet, or alternately can be mounted to the top of the cabinet or even on the cabinet’s exterior, enabling you to easily install readers without having to rearrange rack assets.

• Instantaneous Tag Reporting

• Specially Designed for Use in Rack Cabinets or Two-Post Racks

• Designed for use with RF Code R-Series Active RFID Tags

• Small Footprint and Flexible Mounting Options

• Direct API Interface Available

• Wired Ethernet Communications

• Patented Anti-Collision Technology to Manage High RF Densities

• Dual Channel Receiver Provides Tag Signal Reception Diversity

• Optional Antenna Configurations for Customized Coverage Zones

• Standard 110/220 Power Supply and optional Power over Ethernet (PoE)

Operation
Operating Frequency	433.92 MHz
Ethernet	10Base-T via RJ45
Protocol	TCP/IP
Serial RS232	115.2 kbps via 9-pin D connector
Receiver Sensitivity	> 50 dB dynamic range (-58 dB to -108 dB)
Default Range Settings	8 factory programmable range settings in 5 dB increments
Customizable Control	Range settings selectable in 1 dB increments
Tag Density	Up to 140 tag reports per second (TRPS)
Group Code Management	Up to 8 tag group codes can be monitoried separately
Enclosure
Width	5.80 in (147 mm)
Depth	4.50 in (114 mm)
Height	1.70 in (43 mm)
Weight	16 oz (453 g)
Construction	Aluminum powder coat protected
Durability	Tough, impact resistant and temperature stable
Mounting	Includes brackets for standard 19” 1-U rack mount; If the top U of the rack is not available for use the R200 can also be installed inside the top of the rack or mounted on top of the rack.

Environmental
Operating Temperature:	-20° C to +70° C
Storage Temperature:	-40° C to +80° C
Operating Humidity	10% to 90% non-condensing
Electrical
Power	9-20 VAC / 12-28 VDC
Power Consumption	2.5 W (typical)
Power Supply	120 VAC adapter / 12 VDC-500 mA
LED Indicators
Front	On-Ready, Tag Activity
Back	Link, Collision
Antenna Connection
Connector Type	Dual-channel SMA flange receptacles
Antenna Type	Coaxial cable antennas (2)

Technical Specifications Sheet (PDF)

Photos